TRAMPOLINE MAT ASSEMBLY
Step 8 – Mat Assembly
The complete trampoline SPRING lay out should look as shown below.
Place the Trampoline Mat (# 18) in the center of the trampoline frame with the warning labels facing up. Begin by
attaching Springs (# 17A and #17B) to the four corners of the mat as shown in FIGURE 16-A, then continue to
attach springs in the sequence shown in FIGURES 16-B, 16-C and 16-D.
Hint:
The number of triangle-rings sewn onto the mat is equal to the number of holes on the frame. If you notice
that you have missed a corresponding hole or triangle-ring, remove and reinstall the springs as necessary while
maintaining an even distribution of tension of the mat. Make sure to wear gloves and goggles to avoid injuries
during assembly.
FIGURE16-A
23
TRAMPOLINE MAT ASSEMBLY
Step 8 – (Continued)
FIGURE16-B
FIGURE16-C
FIGURE16-D
24
TRAMPOLINE MAT ASSEMBLY
Step 8 – (Continued)
FIGURE16-B
FIGURE16-C
FIGURE16-D
24
TRAMPOLINE MAT ASSEMBLY
Step 8 – (Continued)
FIGURE16-B
FIGURE16-C
FIGURE16-D
24
A
B
C
D
