TRAMPOLINE MAT ASSEMBLY
Step 8 – Mat Assembly
The complete trampoline SPRING lay out should look as shown below.
Place the Trampoline Mat (# 18) in the center of the trampoline frame with the warning labels facing up. Begin by
attaching Springs (# 17A and #17B) to the four corners of the mat as shown in FIGURE 16-A, then continue to
attach springs in the sequence shown in FIGURES 16-B, 16-C and 16-D.
Hint:
The number of triangle-rings sewn onto the mat is equal to the number of holes on the frame. If you notice
that you have missed a corresponding hole or triangle-ring, remove and reinstall the springs as necessary while
maintaining an even distribution of tension of the mat. Make sure to wear gloves and goggles to avoid injuries
during assembly.
FIGURE16-A
23
NOTE!
There are two
lengths of spring.
They must be fitted
according to the
illustration. /
OBS!
Det finns två
längder på fjädrarna,
de ska monteras
enligt illustrationen. /
OBS!
Fjærene har
to lengder og skal
monteres som vist på
illustrasjonen.
/
HINWEIS!
Es gibt
zwei Federlängen, die
wie unten abgebildet
montiert werden. /
HUOMIO!
Jousia on
kahden pituisia. Ne
tulee asentaa kuvan
mukaisesti.
8
SE
ENG
NO
DE
FI