23
DISASSEMBLY OF THE TRAMPOLINE AND ENCLOSURE
Make sure that the knots and bows are tight for all elastic straps.
Make sure the Frame Pad is securely attached to the frame and completely covers the frame and all of
the springs before using this trampoline. Do not use the trampoline if even one spring or triangle-ring is
damaged or missing.
Perform a complete inspection of the trampoline to ensure all parts are assembled and attached properly.
Read this entire manual and make sure all jumpers completely understand all of the warnings printed in
the manual and on the various warning signs. Instruct all jumpers on the basic bounces described in the
manual.
Do not attempt to disassemble any frame components until all of the springs and the trampoline mat have been
removed. You should remove the springs in the same order they were installed to ensure even tension of the
mat. Wear heavy duty working gloves to protect your hands from injuries during installation by the springs and
protective goggles to avoid injuries to the eyes.
Step 24 – Closing the Enclosure
Close the zipper located at the entrance of the Enclosure Netting (# 29), and secure the entrance by
connecting the buckle as shown in FIGURE 34.
The zipper and buckles should be closed during use to avoid users falling out of the trampoline, as
well as during periods of non-use to restrict access by unauthorized users.
FIGURE 34
ZIP
# 29
38
