Russound CAM6.6X-S1 Instruction Manual Download Page 12 | Manualshive

Page: 12 / 116

background image

12

USER

USER MENU SETTINGS

UNO-S1 User Menu Operation

The User Menu allows the user to adjust the
audio properties and control functions of a par-
ticular room.

To enter or exit the User Menu, press and hold

during normal operation. The following keys

are used to navigate and make changes while
using the User Menu:

Press and hold to adjust feature setting

(increment)

Press and hold to adjust feature setting

(decrement)

Go to next feature.
Go to previous feature.
View current feature setting.

Note: When within the UNO-S1 User Menu, if no
keys are pressed, the display will revert back to
its runtime display.

UNO-S1 User Menu

The following features make up the User Menu:

Bass Treb Loud Bal OnVol

Bkgnd DND Party

Feature and Setting:

1. Bass

-10 < Bass:Flat > +10

2. Treb (Treble)

-10 < Treble:Flat > +10

3. Loud (Loudness)

(more bass, fuller sound)

On or Off

4. Bal (Balance)

Left 10 < Center > Right 10

5. OnVol (Turn on Volume)

(default room volume

level) 0 to 100 (in steps of 2)

6. Bkgnd (Background Color)

(keypad back-

ground light) Amber or Green or Off

7. DND (Do Not Disturb)

- On or Off (default)

Do Not Disturb means do not disturb this room or
selected source. This stops pages from being
sent to this room, stops an “All Off," "All On" or
Party Mode command from affecting this room.

When another UNO Systems Keypad selects the
same source, a DND message will scroll on the
the LCD panel, alerting the user the source is in
Do Not Disturb mode.

8. Party (Party Mode)

- Master or Off

When in “PARTY MODE” the system is primarily
controlled by a “MASTER” Keypad. Party Mode
links all rooms to the same source which is
selected by the Master Keypad room. Any keypad
in the system can become a Master Keypad (if
enabled) but only one Master Keypad may exist at
a time in Party Mode. Selecting Master Keypad
mode from another keypad will transfer Master
Keypad control to that room and release it from
the first. When the source selected in the Master
Keypad room is changed then the source for all
rooms changes as well. The keypad will scroll a
PARTY message on the LCD panel. It will scroll a
MASTR message in lieu of PARTY if Master is
enabled.

Volume level changes at the Master Keypad will
be reflected in all rooms in Party Mode. Non-
Master zones in Party Mode can temporarily over-
ride Master Keypad volume level adjustments for
their particular room preference. Master Keypad
will not change Bass, Treble, or Loudness adjust-
ments for any other rooms other than the Master
Keypad room. Every other keypad will still operate
its respective bass, treble, balance and loudness
adjustments for that room.

«
...
10
11
12
13
14
...
»

Summary of Contents for CAM6.6X-S1





















































































































Reviews:

No comments

Related manuals for CAM6.6X-S1

Brand: Labgear Pages: 14

Brand: NAD Pages: 2

ATR833A-II-OLED

Brand: F.u.n.k.e. Pages: 56

Brand: JFSound Pages: 52

Brand: Xomax Pages: 18

XM2GO - MyFi Portable Satellite Radio

Brand: XM Satellite Radio Pages: 15

Brand: Audiovox Pages: 112

Brand: Nexa Pages: 24

Brand: Kaon Pages: 25

Brand: Nakamichi Pages: 31

u-blox 8NL-8000U

Brand: Navilock Pages: 11

Brand: B&K Pages: 88

Brand: Icom Pages: 96

Brand: Effort International Pages: 23

Brand: PCB Piezotronics Pages: 17

Brand: StarTech.com Pages: 10

Brand: Icom Pages: 89

Streamer GT SIR-SL1C

Brand: Sirius Satellite Radio Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands