LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
8
Chapter 2: Installation and operation
2.1
List of product
All RuiDa control Systems, Inc. motion controller products, accessories, and amplifiers contain static
sensitive components that can be damaged by incorrect handling. When installing or handling Delta Tau
Data Systems, Inc. products, avoid contact with highly insulated materials.
Only qualified personnel should be allowed to handle this equipment.In the case of industrial applications,
we expect our products to be protected from hazardous or conductive materials and/or environments that
could cause harm to the controller by damaging components or causing electrical shorts. When our products
are used in an industrial environment, install them into an industrial electrical cabinet or industrial PC to
protect them from excessive or corrosive moisture, abnormal ambient temperatures, and conductive materials.
If RuiDa control Systems, Inc. products are exposed to hazardous or conductive materials and/or
Environments, we cannot guarantee their operation.
When you received our product, please check the type and accessories and make sure these are
according to what you ordered. If there were difference, please contact RuiDa technology.
List of Product
：
RDS3040G-PCI Motion controller
；
Terminal board
；
68 PIN SCSI cable
；
CD
。
2.2 RDS3040G-PCI motion controller diagram
The diagram of RDS3040G-PCI is showed in picture 2-1
：
NOTICE
！
Avoid the controller form ESD, please release the static charge before touching
the motion controller.
