LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
52
（
5
）
Process parameter configure
（
6
）
Run and the running information
3.2.1 Build up coordinate
In the laser cutting system, the coordinate is very important. According to laser cut machine, there are usually
2 coordinates. One is machine coordinate. Machine coordinate is generated by the home switch that install in the
machine. Once the position of the home switch is fixed, the machine coordinate is fixed. As is shown in picture
3-3.
Picture3-3 Machine coordinates
After home switch is installed
，
The parameter of the home switch should be set properly in order to run a motion
correctly. Picture 3-4 shows the parameters about the home
。
