LaserCuttistV1.2 Laser Cutting system
RuiDa Technology E-Mail:
1TH FLOOR,5TH BUILDING,NANYOU
TIANAN INDUSTRIAL ZONE,SHENZHEN
Web:
www.rd-acs.com
Phone: (086)0755-26066687
FAX: 0755-2698287
30
2.2.4
Menu-parameter
The parameters include machine parameter, system parameter, cut parameter, file parameter.
1 Machine parameter
：
The machine parameter is just only opened to the machine manufacture. So the parameter is not allowed to
be modified without the manufacture’s authorization. There is a password protect to prohibit to modify the
parameters. When the password you entered has been authorized, the dialog will be opened as picture 2-17.
Picture 2-17 machine pareameter
1)
Direction polar
：
You can change the direction of the axis motion when you send positive pulse. For example, you have
defined the positive direction of a axis. If you find that the axis run to negative direction when you send a
positive movement, you should change the direction polar.
2)
HOME switch polar
：
If the home switch output high level signal when the home switch is triggered, you should select
“Hight”. If the home switch output low level signal when the home switch is triggered, you should select
“Low”.
NOTICE: the home switch must be according with the polar parameter. Or the going home
process will executed incorrectly.
3)
Limit polar
：
