27
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Figure 21.
Strip the DC cable and the four conductors
5.
Insert the stripped part of the conductors into the four connector pins, and then crimp
the edges of the connector pins to secure the conductors. Alternatively, use a soldering
gun to solder the conductors to the pins.
6.
Insert all four connector pins into the holes on the cord connector. See
Figure 33
for
the correct pinout connections.
Figure 22.
Pinout connections for the DC cable
3/8 inches (max)
7/32 inches (max)
No.
Pinout
1
+DC power
2
-DC power
3
Factory reset
4
Ground
1
4
2
3
