Check the following LEDs’ status. If the Internet LED is on, your router is
connected to the internet successfully.
Quick Installation Guide
Wireless 4G LTE Router
1. Connect the Hardware
3. Enjoy the Internet
2. Verify the Hardware Connection
Images may differ from actual products.
Note: If the Internet LED does not turn on, please refer to
Q2
of
Need Help?
in this guide.
Power
On
On
Internet
On
Wi-Fi
For better internet connection, make sure
2 or 3 bars
of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
Wired
Connect your computer to the router's LAN port via an Ethernet cable.
©2020 TP-Link 7106509065 REV1.1.0
Wireless
Find the default SSID (network name)
and wireless password printed on the
label at the bottom of the router.
a.
Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
b.
300Mbps Wireless N 4G LTE Router
Model: TL-MR100
S/N:XXXXXXXXXXXXX EU/1.0
IMEI:XXXXXXXXXXXXXXX
Power:
9V 0.85A
Default Access:
http://tplinkmodem.net
TP-Link Technologies Co., Ltd.
No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC
SSID:TP-Link_XXXX
MAC:XX-XX-XX-XX-XX-XX
Wireless Password/PIN: XXXXXXXX
SSID:TP-Link_XXXX
MAC:XX-XX-XX-XX-XX-XX
Wireless Password/PIN: XXXXXXXX
b.
With the gold contacts
facing down, insert the
nano SIM card into the
slot until you hear a click.
a.
Install the antennas and
position them upwards.
c.
Connect the
power adapter
to the router.
Power adapter
