55
Mounting the Access Point
Step 2: Attach the Dynamic Bracket to the Access Point
Figure 42.
Insert hex bolts into the mounting holes
5.
Finger tighten the hex bolts.
6.
Adjust the Access Point to your desired orientation.
NOTE:
If you have not yet determined the optimal orientation for your Access Point, refer
to
“Determine the Optimal Mounting Location and Positioning”
on
page 9
for orientation
guidelines.
7.
Using a 10mm ratchet wrench, tighten the hex bolts to fix the Access Point’s orientation.
Screw torque value must be 0.6-0.8 Newton meter (Nm).
You have completed mounting the Access Point.
Hex bolts
