Ruckus Wireless ZoneFlex 7761-CM, Installation Manual

Page: 38 / 78

32
Hardware Features
Pointing the CMAP to ZoneDirector
Table 6. Parts and connectors on the CMAP
Label Description
Ethernet Port RJ45 port that supports 10/100Mbps connections and provides
Power over Ethernet (PoE) power to compliant devices.
Antenna Connector One of the three connectors for the three 5GHz antennas supplied
with the CMAP. The other two connectors are located on the other
side of the unit (see
Figure 23 ).
DC Connector In addition to the power supplied by the coaxial cable from the
cable modem termination system (CMTS), the CMAP may also be
DC powered.
Shorting pins 3 and 4 in the DC power connector using an electrical
shunt resets the CMAP to factory default settings. For more
information, refer to
“Troubleshooting” on page 68.
Coaxial Cable
Connector A Provides a sample of the downstream RF signal as seen by the
cable modem. (THIS FEATURE IS UNSUPPORTED.)
Coaxial Cable
Connector B Connects to the CMTS at the headend using a tap on the plant
and it provides AC power to the CMAP. AC power is supplied via
Power Over Cable (POC). For more information, see
“Using Power
Over Cable (Actual Deployment)” on page 49.