Ruckus Wireless ZoneFlex 7761-CM, Installation Manual

Page: 19 / 78

13
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
2. Verify that the common wireless settings are configured as listed in Table 2 .
3. If you made any changes to the Common tab that you want to save, click Update
Settings .
4. Repeat Step 1 through Step 3 for Configuration > Radio 5G .
5. Continue to Configure Wireless # Settings .
Table 4. Common wireless configuration
Setting Recommended Value
Wireless Mode Auto-select
Channel SmartSelect
Channel Width 20MHz or 40MHz
Country Code
• If you purchased the access point outside of the United States, verify
that the value is set to your country or region. Selecting the correct
country code ensures that the access point uses only the radio
channels allowed in your country or region.
• If you purchased the access point in the United States, this value is
fixed to United States at the factory and is not user-configurable.
NOTE: The two radios on the CMAP are always configured with the
same country code setting. If you change the country code for Radio
2.4G, for example, the same change is automatically applied to Radio
5G.