Ruckus Wireless ZoneFlex 7761-CM, Installation Manual

Page: 15 / 78

9
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
5. Click Use the following IP address , and then configure the IP address settings with
the values listed in Table 2 . For a sample configuration, refer to Figure 5 .
6. Click OK to save your changes and close the Internet Protocol (TCP/IP) Properties
dialog box.
7. Click OK again to close the Local Area Connection Properties dialog box.
Windows saves the IP address settings that you configured.
Figure 5. Sample configuration in the Internet Protocol (TCP/IP) Properties dialog box
Table 2. Configure your computer’s IP address settings
IP address
192.168.100.77
or any address on the 192.168.100.x network
except:
- 192.168.100.2
which is already used by the access point, or
- 192.168.100.1
which is already used by the cable modem.
Subnet mask
255.255.255.0