Ruckus Wireless ZoneFlex 7761-CM, Installation Manual

Page: 18 / 78

12
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
Step 4: Configure the Wireless Settings
To complete this step, you need to configure the settings on the Common tab and at least
one Wireless # tab. These are the essential wireless settings that enable wireless devices
on the network to associate with the access point.
NOTE: The CMAP has one 2.4GHz radio and one 5GHz radio. The wireless settings for
each radio need to be configured separately on the Web interface (except for the country
code setting, see note in
Table 3 ). To configure the 2.4GHz radio settings, click
Configuration > Radio 2.4G . To configure the 5GHz radio settings, click Configuration
> Radio 5G .
For your reference, the default wireless settings on the access point are listed in Table 3 .
Configure Common Wireless Settings
1. On the left menu of the Web interface, click Configuration > Radio 2.4G . The
Common page appears.
Figure 9. The Configuration > Radio 2.4G > Common tab
Table 3. Default wireless settings
Setting Default Value
SSID (network name) Wireless 1 to Wireless 8 (8 WLANs)
Encryption (security) Disabled on all WLANs
Default management IP address
192.168.100.2