RTS RVON-I, User Manual

Page: 8 / 40

Introduction
4
Pin Outs for Connections
NOTE : The DB-25 pin GPI/O connector can be directly
connected to the Zeus, Zeus II, ADAM CS, and ADAM
** Connection to a Cronus Intercom requires a customer
cable assembly.
RJ-45 Pin Function Ethernet
1 Ethernet TPO+
2 Ethernet TPO-
3 Ethernet TPI+
4 TPO+
5 TPO-
6 Ethernet TPI-
7 TPI+
8 TPI-
DB-9 Pin Function I/O
1 RS485+
2 RS485-
3 N/A
4 RVON-I/O Audio IN+
5 RVON-I/O Audio IN-
6 N/A
7 RVON-I/O Audio OUT-
8 RVON-I/O Audio OUT+
9 N/A
See page Figure 2, “DB-9 Crossover Cable Connection
Diagram,” on page 6.
DB-9 Function Serial Port
1 N/A
2 RXD, RVON-I/O Received Data
3 TXD, RVON-I/O Transmitted Data
4 N/A
5 GND
6 N/A
7 N/A
8 N/A
9 N/A
DB-9 Pin Function Relay 1&2
1 Closed 0
2 Open 0
3 +12V Through 300 Ohm Resistor
4 Closed 1
5 Open 1
6 Common 0
7 GND
8 GND
9 Common 1
DB-25 Pin Function GPI/O
1 GPO 1
2 GPO 2
3 GPO 3
4 GPO 4
5 GPO 5
6 GPO 6
7 GPO 7
8 GPO 8
9 GND
10 GND
11 GND
12 GND
13 GND
14 GPI 1
15 GPI 2
16 GPI 3
17 GPI 4
18 GPI 5
19 GPI 6
20 GPI 7
21 GPI 8
22 GND
23 GND
24 GND
25 GND
DB-9 Pin Function Relay 1&2