RTS RVON-I, User Manual

Page: 29 / 40

25
RVON-I/O Command Table
RVON-I/O Command Table
TABLE 9.
RVON-I/O Command Table
Command Parameter 1 Parameter 2 Description
show rvon
Shows RVON-I/O IP Address and other general
information.
show channel Shows destination address and connection information.
show serial Shows serial port setting.
show gpio Shows gpio settings.
show panel
Shows the channel control settings (poll id and baud
rate).
show emac Shows Ethernet settings.
set rvon Help screen which lists all “set rvon” commands.
set rvon ip_addr X.X.X.X Set the IP Address for the RVON-I/O.
set rvon net mask X.X.X.X Set the Network Mask for the RVON-I/O.
set rvon gateway X.X.X.X Set the Gateway IP Address for the RVON-I/O.
set rvon user username
Set the RVON-I/O user name for Telnet access.
Default = telex
set rvon password password
Set the RVON-I/O password for Telnet access (8-40
characters).
Default = password
set rvon vad_threshold adaptive (#)
Set the VAD threshold (silence detection). Adaptive
refers to autoselect. The # can be -20 to +10 dBm.
set channel
[chan] Help screen, which lists all “set chan” commands (0-7).
This refers to VOIP channel setting.
set channel
[chan]
dest_ip X.X.X.X
Set the destination IP Address for this particular RVON
channel.
set channel
[chan]
dest_type X X = 0 (rvon-8), 1 (rvon-1, 2 (rvon-I/O
set channel
[chan]
dest_chan X
Set the destination channel - the port on the far end (0-
7).
set channel
[chan]
chan_codec X
Set the profile to use which includes the compression
codec (0-27) (see Table 11 on page 27).
set channel
[chan]
input_gain X
Set the input gain for the specified channel -14 to
+14dB
set channel
[chan]
output_gain X
Set the output gain for the specified channel -14 to +14
dB.
set channel
[chan]
onhook force the channel to disconnect.
set channel
[chan]
offhook force the channel to connect.
set serial Help screen, which lists all “set serial” commands.
set serial mode X
Set the serial mode.
0 = Pass Through mode
set serial ip_addr X.X.X.X
Set the destination IP Address for this serial pass-
through port.
set serial ip_addr_2 X.X.X.X Not Available