RTS RVON-I, User Manual

Page: 22 / 40

Configuration
18
NOTE : Press PGM to skip over any octet that does not need modification.
10.
Repeat steps 8 and 9 until the entire IP Address is entered.
11.
Press PGM .
The Netmask menu item appears.
NOTE : Once you have entered the IP Address, you will then enter the Netmask. The Netmask is a string of numbers similar to
an IP Address, except that it masks or screens out the network port of an IP Address so that only the host computer part of the
address remains (for example, 255.255.255.0).
12.
Press PGM .
The current Netmask appears .
13.
Enter the first number in the Netmask.
This activates the first octet in the Netmask and clears the rest of the Netmask.
14.
Press PGM .
This confirms the first octet in the Netmask and moves you to the second octet .
NOTE : Press PGM to skip over any octet that does not need modification.
15.
Repeat steps 13 and 14 until the entire Netmask is entered.
16.
Press PGM .
The Gateway IP Address menu item appears.
NOTE : Once you have entered the Netmask, you may need to enter the Gateway IP Address. A Gateway is a node (for
example, a computer) on a network that serves as an entrance to another network.
17.
Press PGM .
The current Gateway IP Address appears .
18.
Enter the first number in the Gateway IP Address.
This activates the first octet of the Gateway IP Address and clears the rest of the address .
19.
Press PGM .
This confirms the first octet in the Gateway IP Address and moves you to the second octet.
NOTE : Press PGM to skip over any octet that does not need modification.
20.
Repeat steps 18 and 19 until the entire Gateway in entered.
21.
Press PGM .
22.
Press CLR to exit the menu.
The changes are now enabled .
Configure the IP Address from a KP-812
To configure the IP Address from a KP-812 keypanel, do the following:
NOTE : The firmware must be at 1.1.1 or higher.
1.
On the KP-812 turn the Select knob to scroll to Menu.
2.
Tap the Select knob.
The top level menu appears .
3.
Turn the Select knob to scroll to the Service menu item.
4.
Tap the Select knob.
The Service menu appears.
5.
Turn the Select knob to scroll to the RVON Setup menu item.