34
11.
At the prompt, type
set channel 0 dest_ip 192.168.0.10
(the address of the RVON-8 you want to connect with).
12.
Press
Enter
.
13.
At the prompt, type
set channel 0 dest_type 0
(this tells the RVON-I/O it is connecting to an RVON-8).
14.
Press
Enter
.
15.
At the prompt, type
set channel 0 dest_chan 0
(this tells the RVON-I/O it is connecting to channel 0 of the RVON-8).
16.
Press
Enter
.
17.
At the prompt, type
set channel 0 chan_codec 2
.
This tells the RVON-I/O to use Codec G.711u, 64k 30ms packtes, VAD ON connecting back to the RVON-8. To use a
different codec, see Table 11, “Supplemental Coding Table,” on page 27.
18.
Once finished, type
activate
.
19.
Press
Enter
.
20.
Configure the RVON-8 via AZedit to connect to the RVON-I/O.
The panel connected should be passing data and audio within a few moments.
The front panel Green LED for the first channel should be flashing, instead of solid, from the data.
Setting Channel Information of an RVON-I/O for a Remote Keypanel
NOTE
: In this example, the first port of Zeus (J1) is connected to the I/O connector of the RVON-I/O, then connected via
Ethernet back to the first channel of an RVON-1 card installed in a KP-32.
RVON-I/O Unit Settings
•
DIP switches two through four need to be in the OPEN position (Up).
•
DIP Switch 1 should be in the “Down” position (Remote)
•
RVON-I/O IP Address should be set to 192.168.0.1
•
Running version 1.0.0 firmware or higher
KP-32 Unit settings
•
The KP-32 with RVON-1 IP Address should be set to 192.168.0.10
•
Running version 1.1.0 firmware or higher on the RVON-1 card
To find the RVON-1 version of the KP-32, do the following:
1.
Open a
Telnet Session
.
2.
Type
telnet 192.168.0.10
(default).
3.
Press
Enter
.
RVON login appears.
4.
Type
telex
, and press
Enter
.
RVON password appears
.
5.
Type
password
, and press
Enter
.
6.
At the prompt, type
dbgcmd
and press
Enter
.
You have entered MXP programming shell.
7.
At the MXP prompt, type
show rvon
and press
Enter
.
A list of settings will appear which contains the RVON-1 version.
NOTE
: If the RVON-1 is not at Version 1.1.0 or higher, contact your RTS service engineer.
Summary of Contents for RVON-I
Page 1: ...RVON I O User Manual 9350 7772 000 Rev E 6 2006...
Page 4: ......
Page 36: ...Configuration 32...
Page 40: ......
