35
Setting Channel Information of an RVON-I/O for a Remote Keypanel
To set the channel information, do the following:
1.
Connect the RVON-I/O Ethernet to the LAN.
2.
Open a Telnet session.
3.
At the prompt, type
telnet 192.168.0.1
(default RVON-I/O IP Address).
The RVON login screen appears.
4.
In the logon field, type
telex
(default user logon for the unit).
5.
Press
Enter
.
6.
In the password field, enter
password
(default password for the unit).
7.
Press
Enter
.
8.
At the prompt, type
dbgcmd
and press
Enter
to access the MXP programming shell.
9.
At the prompt, type set channel.
10.
Press
Enter
.
The Set Channel menu list appears.
11.
At the prompt, type
set channel 0 dest_ip 192.168.0.10
(the address of the RVON-1 you want to connect with).
12.
Press
Enter
.
13.
At the prompt, type
set channel 0 dest_type 1
(this tells the RVON-I/O it is connecting to an RVON-1).
14.
Press
Enter
.
15.
At the prompt, type
set channel 0 dest_chan 0
(this tells the RVON-I/O it is connecting to channel 0 of the RVON-1).
16.
Press
Enter
.
17.
At the prompt, type
set channel 0 chan_codec 3
.
This tells the RVON-I/O to use Codec G.711u, 64k 30ms packtes, VAD ON connecting back to the RVON-1 channel. To use
a different codec, see X.
18.
Type the s
et panel 0 poll_id 1
and press
Enter
.
This tells the RVON-I/O channel that is connection back to a matrix port with a poll id address of 1, por 1,9,17,25, etc.).
19.
Type
set panel 0 baud 9600
and press
Enter
.
This tells the RVON-I/O that the data baud rate is 9600 bps for this channel.
20.
Once finished, type
activate
.
21.
Press
Enter
.
22.
Configure the RVON-1 tp accept the RVON-I/O connection.
The panel connected should be passing data and audio within a few moments. The front panel green LED for the first
channel of the RVON-I/O should be flashing from the data instead of just solid when the keypanel is connected.
Summary of Contents for RVON-I
Page 1: ...RVON I O User Manual 9350 7772 000 Rev E 6 2006...
Page 4: ......
Page 36: ...Configuration 32...
Page 40: ......
