File No.
：
VersionA1
3
Internal
③
Reset and return to the parameters before being changed.
7) Zoom in/out mode
①
Click the zoom icon
“
”
and input the required proportion or dimension in any box below to change
the size of model. Please note that, it is only required to adjust one of the parameters, and the other parameters
will also be changed as per the proportion;
②
Click the model directly using the left button of mouse, hold down the left mouse button, and then move
the mouse for zooming;
③
Please note that the fixed length and width ratio with
“
�
”
below. If removing
“
�
”
and changing X or Y
or Z, it is possible to be only effective to X/Y/Z to be changed;
④
Reset and return to the parameters before being changed.
8) Rotation (Model rotates on Z plane axis)
①
Click the rotation icon
“
”
, and input the required angle in the box below to change the angle of model
on Z axis;
②
Click the model directly using the left button of mouse, and then move the mouse to change the angle;
④
Reset and return to the parameters before being changed.
rrsp
sprro.c
o.com
om
