Royal ts1200mw User Manual Download

Page: 91 / 158

TS1200MW User’s Guide 84

Running Management Reports

• 3 - Daily Dept Group Report Shows quantity and dollar amount of

the specified department group rung up
today.

• 4 - Daily PLU Full Report

Shows quantity and dollar amount of
each PLU number rung up today.

• 6 - Daily Clerk Report

Shows total sales amounts of each Clerk
Number.

• 7 - Hourly Report

Shows total sales amounts rung up each
hour.

• 11 - PTD Full Report

Shows each department number, total
items sold, dollar amount, and net sale
amount rung up, either weekly or
monthly.

• 12 - PTD Dept Full Report

Shows department, quantity, dollar
amount, total of each department
number rung up over a period of time.

• 13 - PTD Dept Group Report Shows the specified department,

quantity, dollar amount, and total sale
amount, either weekly or monthly.

• 14 - PTD PLU Full Report

Shows quantity and dollar amount of
the specified group number rung up
since the report was last cleared.

• 15 - PTD PLU Group Report Shows quantity and dollar amount of

each PLU group number rung up since
the report was last cleared.

• 16 - PTD Clerk Report

Shows total sales amounts of each Clerk
Number, either weekly or monthly.

• 51- Table Report

Shows total sales amounts for each table
since last clear.

• 52 - Active Table Report

Shows information about active tables,
including assigned clerk. Also
viewable in Reg mode.

• 101 - PLU Inventory Report

Shows the programmed PLUs and
their current stock level.

• 201 - EJ Report (full)

Shows/prints the information in the
Electronic Journal.

• 202 - EJ Report by Date

Shows the information in the Electronic
Journal, by specified date range.

• 210 - Individual PLU Report

Shows quantity and dollar amount of a
specific PLU.

Summary of Contents for ts1200mw































































































































































Search results

Summary of Contents for ts1200mw

Reviews:

Related manuals for ts1200mw

Brands by name

Popular brands

Royal ts1200mw, User Manual

Search results

Summary of Contents for ts1200mw

Reviews:

Related manuals for ts1200mw

Brands by name

Popular brands