manualshive.com logo in svg

Royal ts1200mw, User Manual

Share
Download
Royal ts1200mw User Manual Download Page 106

Chapter 11    Troubleshooting

99                                                                                                                                 TS1200MW  User’s Guide 

Performing a Partial Reset

If you are in the middle of a transaction when you do a partial rest, when 
the cash register powers back on, that transaction must be finalized before 
you can move forward. 

To do a partial reset

1

Turn off the cash register. 

2

Slowly count to 3. 

3

Turn the cash register back on. 

4

Continue with normal operations.

Performing a Master Reset

If nothing else works, perform the following procedure. 

Before you start, make sure you have the stylus that came with the cash 
register. 

To do a full system clear

1

Turn off the cash register. 

2

Put the MGR key in the Mode key slot and turn it to the PROG 
position.

3

Turn on the cash register. 

4

When the 

System Initializing

 message appears on the screen, quickly press 

the lower left corner and the upper right corner of the screen with your 
thumbs. The cash register beeps and the printer prints a confirmation 
message.

5

Using the stylus and following the onscreen instructions, press the 2 
points to reinitialize the screen. 

6

Reprogram the cash register.

If Nothing Helps

If a problem still persists, call our Customer Service Support Line toll-free 
at 1-800-272-6229. 

Caution

This procedure resets the cash register to the factory settings. You lose all 
your transaction and programming information. 

Summary of Contents for ts1200mw































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands