Royal ts1200mw User Manual Download | Manualshive

Page: 104 / 158

background image

Chapter 11 Troubleshooting

97 TS1200MW User’s Guide

No Receipt Printing

If the cash register is not printing on the receipt, check the Print Receipt
option. Go to 406 -- Options and then select Printing Parameters Settings.
Press

Page down

to see the Receipt on/off setting.

No Printing on the Receipt

If the cash register is set to print the receipt and no receipt is printing,
make sure you are using

thermal paper

and the paper is installed

correctly. For more information about correctly installing the paper, see
Installing a Replacement Paper Roll on page 92.

Bond paper will not work in this cash register. If needed, contact the Royal
Customer Support hotline at 1-800-272-6229 for additional help.

The Cash Register Screen goes Dark

This is normal. This cash register has a “go to sleep mode” that turns the
cash register off after a specified time period. You can start the cash
register again by touching the screen.

For more information, see Using Power Saving Mode on page 17.

Electronic Journal Memory Errors

If the Electronic Journal gets too full, you see an error message after each
sale is finalized. Check the Electronic Journal occasionally to see if you
need to run the EJ report. For more information, see More Information
about the Electronic Journal (EJ) Reports on page 88 and Checking the
Electronic Journal Memory on page 90.

Immediately after the current transaction is finished, either print the
Electronic Journal record in Z Mode or manually clear the Electronic
Journal record memory. This section explains how to do both.

Before you start, make sure there is a lot of paper on the receipt paper roll
so the Z Electronic Journal reports can print completely.

To print and clear the Electronic Journal

201 -- EJ Report

1

Put the MGR key in the Mode key slot and turn it to the Z position.

2

If you are prompted for a passcode, enter the 6 digit Z passcode and
press

Enter

.

«
...
102
103
104
105
106
...
»

Summary of Contents for ts1200mw































































































































































Reviews:

No comments

Related manuals for ts1200mw

Brand: TEC Pages: 96

Brand: Nautilus Hyosung Pages: 154

Brand: Nautilus Hyosung Pages: 18

Brand: Sharp Pages: 241

Brand: Ribao Pages: 6

Hengstler tico 734

Brand: impulse Automation Pages: 4

HENGSTLER tico 731.2

Brand: impulse Automation Pages: 6

Brand: DK Online Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands