Royal ts1200mw User Manual Download Page 116

Page: 116 / 158

Chapter 12 Examples

109 TS1200MW User’s Guide

Using Manual Messages

Example 10:

Enter an item for $4.99 for Department 1. Manually enter the

cooking message “No tomato”.

Using the Number keys, press

499

, and then press

Press .

Using the Alpha screen, enter the message

no tomato

, and press

Coupon Discount Sale

Example 11:

Ring up a $1.00 item and then apply a 20% (.20) off coupon.

To ring a coupon discount sale

Using the Number keys, press

100

, and then press

Using the Number keys, press

and then press

Press the

key.

Sales tax is charged on the amount after the coupon is deducted. For
more complex coupons, see Customer Service for help.

Credit Sale

Example 12:

Ring up a $1.00 item in Department 1 and $2.00 in Department 2

and finalize the sale with the Credit key.

To ring a credit sale

Using the Number keys, press

100

, and then press

Using the Number keys, press

200

, and then press

Press .

Note

You do not have to enter an amount before pressing either of the credit keys
unless you set the Compulsory Declaration to On.

Summary of Contents for ts1200mw































































































































































Search results

Summary of Contents for ts1200mw

Reviews:

Brands by name

Popular brands

Royal ts1200mw, User Manual

Search results

Summary of Contents for ts1200mw

Reviews:

Brands by name

Popular brands