Rowe HASCP, Operation Manual

Page: 18 / 79

18
vii. Stage Text Box
1. Status
a. 0x0000 indicates no issues
2. Range (m)
b. The average range collected during the ensemble.
c. The standard deviation the range measurements.
d. The average signal to noise measurement of the surface
echo.
3. Depth (m)
e. HASCP depth measure by the pressure sensor.
4. PingsPerEnsemble
f. The number Pings collected during the ensemble.
5. RangePingsGood
g. The number of good SNR Stage pings that were averaged
together during the ensemble.
6. DepthPingsGood
h. The number of good pressure sensor pings that were
averaged together during the ensemble.
viii. Environment and System Status Text Box
1. Salinity (ppt)
a. The average salinity value used in the speed of sound
calculation.
2. Water (C)
b. The averaged (measure or fixed) water temperature used in
the speed of sound calculation.
3. Internal (C)
c. The average measured temperature on the power regulator
circuit board.
4. Heatsink (C)
d. The average measured temperature on the transmitter heatsink.
5. Pressure (BAR)
e. The average measured pressure.
6. SofS (m/s)
f. The average speed of sound (calculated or fixed) used during the
ensemble.
7. Status
g. 0x0000, 0x0000 indicates no detected issues during the
ensemble.
ix. System Info and HPR text Box
1. Ens
a. Current ensemble number of data being displayed
2. SN:
b. HASCP serial number
3. Firmware:
c. Version number
4. Date Time
d. Time stamp of first ping in the ensemble.
5. Heading (deg)
e. Average Heading collected during the ensemble.
6. Pitch (deg)
f. Average Pitch collected during the ensemble.