Rowe HASCP, Operation Manual

Page: 32 / 79

32
DSXRfilename.abc XMODEM file upload. This command is used to transfer a file, via the serial communication
link, from an external device to the SD card contained within the ROWETECH system. File
names are limited to a maximum of 8 characters before the extension.
DSXTfilename.abc XMODEM file download. This command is used to transfer a file, via the serial
communication link, from the SD card contained within the ROWETECH system to an
external device. File names are limited to a maximum of 8 characters before the extension.
DSFORMAT Format / Erase the SD card.
DSDIR Show SD card directory of stored files.
DSSHOW Show SD card capacity and usage.
Table 7 Configuration Commands
Command Description
CLOAD Load the configuration file “SYSCONF.BIN” from SD car d to the current command set.
CSAVE Save the current command set to the configuration file “SYSCONF.BIN” on SD card.
CSHOW Show command set.
CDEFAULT Restores the system configuration to factory defaults.
Note: Actual default values will vary depending on system type.
Water Profile Commands
Note: Water Profiling commands can be followed by a pair of brackets and a number (i.e. CWPON[1] 1
<CR>) to set a selected subsystem configuration. The brackets are optional for subsystem zero [0].
Table 8 Water Profile Commands
Command Description
CWPON i Enable Type of Processing i
0 = disable
1 = velocity
2 = sediment
3 = stage
CWPBB i, ii Water Profile Broad Band. Sets water profile coded pulse transmission and lag.
i. Acoustic Transmit Type
•
0 = Narrowband
•
1 = Broadband Coded Pulse
•
2 = Broadband Non-Coded Pulse