11
3.3
Terminal
a.
Click the Terminal TAB near the top left of the software window. Refer to Figure 5.
b.
If the HASCP is connected and outputting data, the text page on the right will show what
looks like random binary data. If not, the text page contains the last data displayed before
the HASCP was stopped.
i.
HASCP Control
a.
To STOP the HASCP click BREAK then, after the Wakeup message
appears, click STOP
Copyright (c) 2019 Rowe Technologies Inc. All rights reserved.
HASCP
DP1200 DP600 DP2400 DP1200
SN: 08BJHQ00000000000000000000888888
FW: 00.07.27 Nov 20 2019 05:22:14
STOP+
Troubleshooting:
In the case the system does not connect using the known COM port, please try
another baud rate. Although, default set-up baud rate is 115200, the system may have been used
in another baud rate – You may have to cycle through various baud rates in the COM port to
connect to the instrument.
Figure 5. Connecting to HASCP – Terminal TAB showing BREAK message.
Summary of Contents for HASCP
