7
2.2
Connections to the instrument
Table 2. Connections on the HASCP
Connections
[
Communication cable
to HASCP unit
]
Make sure to properly
orient the pins on the male
and female connectors.
[
Communication cable
Serial Interface and
Power
]
Note:
Apply Molykote 44 to female part of the underwater connector before mating the underwater connector. The link from
the vendor is given below for reference.
Link :
information/subconn-handling-instructions/
To communicate to the external world through RS 485, or RS 232, plug in the female part of the
connector of the 5 m connection cable into the HASCP housing. The other end of the communication
cable has the following interfaces,
Power
RS-232
RS-485
Trigger out,
DAT_COM,
Shield
Summary of Contents for HASCP
