8
Table 3. HASCP communication interfaces
RS 232 (Standard)
DB9
a.
8 bit, No Parity, 115200 Baud (can go higher for short distances)
b.
Full Duplex (3 wire, shares return with 485)
c.
Minimal noise immunity
d.
Short distances (20 m)
e.
Single ended - unbalanced
RS-485 (Standard)
Terminal block
a.
8 bit, No parity, up to 921600 Baud
b.
Half Duplex (3 wire, shares return with 232)
c.
Good noise immunity
d.
Long distances (1000 m)
e.
Differential – Balanced – one line true signal and other line is
false signal or inverted signal. The receiver detects the input and
sees which signal is more positive than other.
Power
9V – 24V
TRIG Out
Trigger output line from HASCP unit
CHGND
Chassis Ground line (used in case of EMI issues)
TRIG IN
Not available and is intended for future use
Summary of Contents for HASCP
