Effectivity 912/914 Series
Edition 1 / Rev. 3
page 19
October 01/2010
d04777
73-00-00
BRP-Powertrain
Maintenance Manual
Flexible fuel line
See Fig. 73-9/2
Each fuel line (5) is supported by a cable clamp (13) on the intake manifold. Each
of these clamps is attached with an allen nut M8 (14), which must be removed.
Further the fuel line is attached with 2 cable straps (15) to the compensation tube
(16).
At the carburetors the ring hose nipple of the fuel line is installed with a distance
sleeve (17) and sealing rings (18). After unscrewing the banjo bolt (19) take off
the fuel lines.
All fuel lines lead to the fuel manifold. Unscrew the banjo bolts (20). Remove the
fuel line (21) (hose line).
Now the fuel lines (5 or 7), the ring hose nipple (22) (connection for return line and
pressure gauge) and 5 sealing rings (23) can be removed.
Unscrew allen screw M10x1x8 (24) with the sealing ring (25).
Carry out a visual inspection of all fuel lines for damage and wear. Pay particular
attention to the formation of any cracks in the area of the connections.
Check the lines for free passage with compressed air and inspect the lines for
scuffing marks.
Fig. 73-9/2
08180
5
5
6
20
19
18
13
14
17
18
26
21
16
20
24
25
15
15
22
23
19
Summary of Contents for MMH-912 Series
Page 463: ......
