Effectivity: 912 Series
Edition 1 / Rev. 1
d04637
page 87
May 01/2009
BRP-Powertrain
INSTALLATION MANUAL
14.4) Connecting dimensions, location of joints and directives for installa-
tion
14.4.1) fuel manifold
See Fig. 2, 3, 4 and 55.
-
position of z4 axis of the fuel manifold:
◆
NOTE:
Dimensions always from point of reference (P).
-
return line to tank (5):
outside dia. ..... 7 mm (.28 in.)
slip-on length: . max. 17 mm (.67 in.)
-
pressure gauge connection (6):
outside dia. ..... 6 mm (.24 in.)
slip-on length: . max. 17 mm (.67 in.)
-
fuel pressure switch connection (9):
thread .............. M10
thread length: .. max. 9 mm (.35 in.)
Tightening torque:
15 Nm (135 in.lb) and Loctite 221.
■
CAUTION:
At loosening or tightening of the banjo bolt (7) (tighten-
ing torque 10 Nm = 90 in.lb.) support the fuel manifold
appropriately.
◆
NOTE:
The connection nipple (5) is furnished with an orifice
(8) (0,35 mm = 0.014 in.) essential for operation of the
fuel system.
If the pressure gauge connection (6) is not used and a
hose nipple (10) installed, the banjo bolt assy. (11)
marked with a colour dot or marked "FUEL" is fur-
nished with an orifice (12) (0,35 mm = 0.014 in.). This
is essential for operation of the fuel system as it
prevents a loss in fuel pressure.
coordinates [mm]
x axis
y axis
z axis
-385,0
-50,0
ca.110
clamp block
02772
