Effectivity: 912 Series
Edition 1 / Rev. 1
d04633
page 31
May 01/2009
BRP-Powertrain
INSTALLATION MANUAL
9) Preparations for engine installation
■
CAUTION:
The stated directives are measures to pay CAUTION to at engine
installation to prevent any accidents and engine damage.
9.1)
Transport
The engine to be lifted by two hooks or straps around the middle (A) of the intake
manifolds.
See chapter engine views, numbering of cylinders and definition of main axes.
9.2)
State of delivery
The engine could be attached with to steel angles anchored on a timber plate.
■
CAUTION:
The attachment screws are only for transport and must not be
used in the aircraft.
9.3)
Engine preservation
The engine is preserved at BRP-Powertrain thus warranting proper protection
against corrosion for at least
12
month after date of delivery from
BRP-Powertrain.
This warranty is subject to the following conditions:
-
the engine has to be stored in the packing as supplied by BRP-Powertrain.
-
the covers on various openings must not be removed (see section of
protective covering)
-
engine has to be stored in a suitable place (at min. - 40 °C (- 40 °F) and max.
+ 80 °C (+ 176 °F)).
If the engine is stored for a period longer than 12 month perform every 3 months
the tasks given in the current valid Maintenance Manual, section "Preservation
of a new engine".
