Ross nielsen NWE-IP, User Manual, Page: 70 / 80

70 • DashBoard Interface Overview NWE-IP User Guide (v5.0)
Figure 16.6 Example of the AES67 Sender Interface
Network Streams Tab
Table 16.11
summarizes the options displayed in the Network Streams tab.
Table 16.11 Network Streams Tab
Item Parameters Description
# of Audio Sessions # Specifies the number of audio sessions for the
AES67 Sender. The Network Streams tab updates
automatically to provide options for configuring
each stream independently.
Default Mapping Applies a default audio mapping of 1:1 where:
• Target 1-8 is mapped to A1-A8
• Target 9-16 is mapped to B1-B8 etc.
Session Name <text> Specifies a unique name for the Sender session
Copy SDP <session name> Copies the Session Description Protocol (SDP)
settings of the specified NWE-IP session. These
settings can then be applied to a downstream
device to establish communications via SDP.
Stream Name <text> Specifies a unique name for the AES67 stream
Transport IP #.#.#.# Specifies the network socket for the audio data for
the session
UDP Port # Specifies the source port to connect to the
advertised stream. This must match the source you
are attempting to connect to.
Interface NET# Specifies the physical port on the NWE-IP that is
used for the stream
# Channels # Specifies the maximum number of audio channels
in the specified stream
DSCP # Specifies the Differential Service Code Point value
for the network layer service for this stream
Channel (read-only) # Assigns a channel ID to the stream