Ross nielsen NWE-IP, User Manual, Page: 45 / 80

NWE-IP User Guide (v5.0) Enabling the Watermark Encoders • 45
Enabling the Watermark Encoders
This chapter outlines the steps required to configure and enable the Watermark Encoder channels for the NWE-IP.
Overview
A Watermark Encoder provides transport stream processing to add Nielsen Watermarking to AES67 audio streams.
DashBoard provides options for specifying the watermarking parameters, including the Source Identification (SID)
obtained from Nielsen Encoder Support.
By default, there are up to four Watermark Encoder channels that can be configured. Each channel is configured
and enabled independently.
Before proceeding, ensure that you have the following information from Nielsen Encoder Support:
• NAES SID
• NAES Check Code
• CBET CSID
• CBET Check Code
Changing the Watermark Encoder Channel Names
It is highly recommended to re-name each Watermark Encoder channel from the default values. This will help to
identify the channels in the other NWE-IP tabs and interfaces.
To change the name for a watermark encoder channel
1. Display the AES67 Receiver interface in DashBoard as outlined in “ To display the NWE-IP interfaces in
DashBoard ” on page 29.
2. Select the Connections tab.
3. Locate the row of buttons in the Output Name area of the tab.
4. Click the
Watermark 1
button.
The button is highlighted and a cursor displays in the button label.
5. Type a new name for the Watermark Encoder channel.
6. Press
Enter
.
7. Repeat steps 4 to 6 for each button.