Ross nielsen NWE-IP, User Manual, Page: 60 / 80

60 • DashBoard Interface Overview NWE-IP User Guide (v5.0)
Timing Tab
Table 16.2 summarizes the fields displayed in the Timing tab.
DNS # On the Gb1 tab, this field is used to specify the IP
address of the DNS server that the NWE-IP will
communicate with
On the NET1 and NET 2 tabs, do not change this
field from its default value of 0.0.0.0.
Method Auto The settings will be assigned by a DHCP server in
your facility
Manual The user manually supplies the Ethernet settings
Link-local
Unknown
The specified port is not used
DHCP
b
Automates the assignment of the Ethernet settings
State (read-only) Activated The specified port is active and is communicating
with valid settings
Disconnected Communication to the specified port is interrupted.
Verify that the settings are correct and the port is
physically cabled correctly.
Unavailable The specified port is not active and is not
configured for use.
Edit Click this button to edit the Address, Subnet Mask, gateway, and Method fields for
the specified port
Apply Click this button to apply the new settings to the specified port
Result (read-only) Success The settings are valid and applied. The specified
port is now active.
Problem: x, y Indicates that the specified port is experiencing an
error where:
•
x states the type of problem
• y indicates the possible cause
a. By default, the Gb1 port is assigned to port 192.168.0.100.
b. If the NWE-IP loses connection to the DHCP server, the Gb1 port is automatically set to an IP address of 169.254.0.100 (link local).
Table 16.2 Timing Tab
Item Parameters Description
PTP Status (read-only) OK (Green) Communication between the NWE-IP and the
Grandmaster or Master device is valid
GM Not Found (Red) Connection to the Grandmaster or Master device is
invalid. Verify that the Domain field on the
Timing tab is set to the correct value.
Apply Changes There are unsaved changes made to the Timing tab
settings
Table 16.1 Ethernet Tab
Item Parameters Description