Rose electronics Orion XC OXS-XC008-FS Installation And Operation Manual Download

Page: 73 / 132

Orion XC Installation and Operation Manual

Setting Up Multi-Screen Control through the Java Tool



Select

Assignment > Multi-Screen Control

in the task area.

Figure 66. Setting Up Multi-Screen Control through the Java Tool

To configure Multi-Screen Control through the Java Took, proceed as follows.

1. Select the block of four ports in the working area list that should be configured for Multi-Screen Control.

Only blocks of four ports that contain at least one CON Unit are shown.

7. Activate the

Manual

option if USB-HID switching is to be restricted to keyboard commands. More

information is in the Multi-Screen Control topic of the Operations section. Manual switching should be

used when multi-head CPU devices are in use.

2. Select the desired configuration layout for the CON Device in the

Arrangement

field

(1 x 4 or 2 x 2). The fields for the configuration of the individual displays will be arranged accordingly.

3. Select one or more control displays within the CON Device by setting the

Control

function to

in the

display field. Control displays are those extender units within the Multi-Screen Control that have a

keyboard and mouse connected. These extender units have the ability to control the Multi-Screen setup

through the connected keyboard and mouse.

4. The

Owner

function is used to designate a control display that will own the Multi-Screen setup, in that

its attached keyboard and mouse will be used to switch between the displays. Enable the

Owner

function on that display from the list of screens. To make a display accessible to all neighboring control

displays, set the

Owner

function to

shared

5. Use the

Frame

function to configure a red frame that shows the current display with mouse control after

the expiration of a selectable timer. The frame to fade in can be individually activated by using a timer

value greater than 0 seconds.

Summary of Contents for Orion XC OXS-XC008-FS





































































































































Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands

Rose electronics Orion XC OXS-XC008-FS, Installation And Operation Manual

Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands