Rose electronics Orion XC OXS-XC008-FS Installation And Operation Manual Download Page 112

Page: 112 / 132

104

Orion XC Installation and Operation Manual

Extender OSD

All extenders used with the Orion XC are provided with their own OSD to display the connection status of the

console.

Figure 101.Extender OSD

The following information is shown in the OSD information screen:

Field

Description

CON

Name of the console

CPU

Name of the currently connected CPU

ACCESS

Full Access

: The console has a KVM connection to the displayed CPU.

Video Access

: The console has a video only connection to the displayed CPU.

Private Mode

: The console has a Private Mode connection to the displayed CPU.

Not connected

: The console is not connected to a CPU.

SHARED

x device(s)

shows the number of devices that are connected to the console’s currently connected

CPU (e.g. 3 devices).

If the field is blank, no other devices are connected to the current CPU.

Note:

If the

Mouse Connect

Keyboard Connect

options are active, the name of the console with

keyboard/mouse control will be displayed at those consoles that do not currently have keyboard/mouse control.

The console is displayed in yellow color under

Access

Summary of Contents for Orion XC OXS-XC008-FS





































































































































Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands

Rose electronics Orion XC OXS-XC008-FS, Installation And Operation Manual

Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands