Orion XC Installation and Operation Manual
53
Setting up CON Devices through the Java Tool
Select
Definition > CON Devices
in the task area.
Figure 54. Setting Up CON Devices through the Java Tool
Select between the following buttons:
Button
Function
New Device
Open a new CON Device
Delete Device
Delete a CON Device
Apply
Confirm a created CON Device
Cancel
Reject changes
>
Assign selected extender units
>>
Assign all available extender
units
<
Remove the selected extender
units
<<
Remove all extender units
The following keyboard commands can be used.
Function
Keyboard
Command
Change assignment number of the EXT unit upwards
<+>
Change assignment number of the EXT unit downwards
<->
To create a new console, proceed as follows:
1. Click the
New Device
button.
2. Select whether to create a real console (
Create a real Console
) or a virtual console (
Create a virtual
Console
), or whether a template of an existing console should be used (
Choose template
).
Note
: A template can only be selected if there is at least one existing CON device.
3. Click the
OK
button.
4. Make all parameter selections that are relevant for the console.
5. To confirm the creation of the new console, click the
Apply
button.
