Rose electronics Orion XC OXS-XC008-FS Installation And Operation Manual Download Page 28

Page: 28 / 132

Orion XC Installation and Operation Manual

Reload Options

The information shown in the Java Tool can be reloaded in different ways.

By pressing <F5> on the keyboard

By clicking

Edit > Reload

in the menu bar

By clicking the "Reload" symbol in the symbol bar

Context Function

The Java Tool offers several context-specific functions that support a user friendly and effective operation. The

individual context specific functions are described in their respective chapters.



To execute a context specific function, click the right mouse button on the corresponding field and select the

desired function.

Sorting Function

Lists and tables in the Java Tool can be sorted so that they can be searched easily.

1. To sort in ascending order, click the left mouse button once on the header of the column to be sorted.

The sort status is indicated by an arrow that points upwards.

2. To sort in descending order, click the left mouse button twice on the header of the column that has to be

sorted. The sort is displayed by an arrow that points downwards.

3. To cancel the sort, click left mouse button once or twice on the header of the sort column until the sort

direction arrow disappears.

Filter Function

Lists and tables in the Java Tool can also be filtered to display only relevant results.

1. To activate a filter, click the right mouse button on the header of the column to be filtered, and select

Set

Filter

2. Enter the word or part of a word to be used as a filter into the header. The filter results are shown

immediately.

3. To delete a filter, click the right mouse button on the header of the filter column, and select

Clear Filter

An active filter is indicated by an asterisk in the header. The filter function is similar to that used in common web

search engines.

Offline Configuration

Configuration and system settings can be changed via the Java Tool in offline mode when a direct connection

between the tool and Orion XC is not available.

To upload a configuration to the matrix, proceed as follows:

1. Select

File > Upload

in the menu bar.

2. Enter the IP address of the matrix, the name and password of the authorized user, and then click the

Next

button.

3. Select the storage location of the new configuration (

default,

config01 - config08

) in the

Select

onfiguration

screen.

4. If the configuration is to be activated as well as uploaded, click on the

Activate

check box

5. Click the

Finish

button.

During the activation of a configuration, the matrix is temporarily unavailable.

Summary of Contents for Orion XC OXS-XC008-FS





































































































































Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands

Rose electronics Orion XC OXS-XC008-FS, Installation And Operation Manual

Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands