Rose electronics Orion XC OXS-XC008-FS Installation And Operation Manual Download

Page: 90 / 132

Orion XC Installation and Operation Manual

License Management

This menu provides for upgrading Orion XC functionality by installing the license keys for new function

bundles. Contact Rose Electronics to purchase license keys. This menu is accessible only from the Java Tool.

Figure 85. License Management through the Java Tool

To activate a function bundle, proceed as follows:

1. Select

Administration > License Management

in the task area.

2. In the working area, enter the license key in

Activate Bundles > License Key

3. Click the

Activate

button to enable the new function bundle. It is not necessary to restart the Orion XC.

Summary of Contents for Orion XC OXS-XC008-FS





































































































































Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands

Rose electronics Orion XC OXS-XC008-FS, Installation And Operation Manual

Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands