Rose electronics Orion XC OXS-XC008-FS Installation And Operation Manual Download Page 105

Page: 105 / 132

STATUS INDICATORS

Orion XC Installation and Operation Manual

Diagnostics and Status Indicators

This section describes the diagnostics that are available on the Orion XC. Status indicators, both physically on

the unit as LED indicators, and in the software, are discussed here.

Status LEDs

The Orion XC components are fitted with the following LEDs for overall status indication.

CPU

Figure 93. CPU Status LEDs

Status LED 2

Status LED 1

Status LEDs for CPU:

Pos.

LED

Status

Description

Status 2

White

Controller is in registration

Red flashing

Registration of the matrix has started

Off

Operating condition

Status 1

White

Controller is in registration

Blue flashing

Registration of the matrix has started

Red flashing

Registration in progress

Green flashing

Operating condition

Due to variations in LED type, "white" might also appear as light purple or light blue.

Orion XC

Summary of Contents for Orion XC OXS-XC008-FS





































































































































Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands

Rose electronics Orion XC OXS-XC008-FS, Installation And Operation Manual

Search results

Summary of Contents for Orion XC OXS-XC008-FS

Reviews:

Related manuals for Orion XC OXS-XC008-FS

Brands by name

Popular brands