Rosco CubeConnect, User Manual

Page: 23 / 37

Multiple Wireless Transceivers
23
There are special settings available when in the
DMX IN / WIRELESS OUT
MODE that allow up to three Transceivers to all transmit within range of each
other, and not corrupt each others’ transmissions. The way this is done is to
establish one of the Transceivers as a Master and the others as Slaves, and to
set a delay time for the Master based on how many Slaves are present.
If there are two Transceivers present, the Master transmits first, the Slave
listens for Master to be done transmitting and then the Slave transmits. The
Master’s built in delay is set for one Slave and insures that the Slave will be
done transmitting before the Master transmits again. This process continues
with neither link transmitting while the other is transmitting.
Master & Slave Indicators
Le
arn
Slave Mast
er & 2 Slaves
Mast
er & 1 Slaves
Mast
er & No Slave
Power
CH2 CH3 CH4 CH1
Le
arn Butt
on