Rosco CubeConnect, User Manual

Page: 20 / 37

DMX In/Wireless Out
20
When the
DMX In Mode
is selected, the unit takes half a universe (channels
1-254) of full speed DMX in, converts each channel to the MINI-SSC protocol,
and then sends the MINI-SSC data out on the wireless antenna. This allows the
Transceiver to act as a bridge between a DMX512 source and wireless lights.
The wireless MINI-SSC data out is sent at the standard 9600 baud 8N1 serial
data settings. At these settings, the MINI-SSC output method cannot transmit
the 254 channels at the same data rate as they come in on the DMX512 input.
The microprocessor utilizes a compression algorithm to reduce the number of
bytes being sent and to keep the data latency to a minimum.
One static scene of DMX IN data can be saved by putting the unit into the
LOCKED MODE by pushing the MODE SELECT BUTTON until the SAVE MODE
LED is illuminated. There is currently not a way to automatically enter the
LOCKED MODE from the DMX IN MODE.