Rosco CubeConnect, User Manual

Page: 15 / 37

DB9 Serial In/Wireless & DMX Out Operation
15
When
DB9 Serial IN / WIRELESS & DMX OUT
is selected, the microprocessor
takes ASCII characters in from the DB9 Serial Connector on the unit.
The application sending data to the Transceiver must send
the characters so that they conform to the MINI-SSC Protocol
which is sent out at the standard 9600 baud rate.
The Transceiver is programmed to listen for channels 1
through 254, for a total of 254 individual controllable
channels. Channel 0 is reserved for commands which can
put the Transceiver into the LOCKED
MODE, or take it out of the LOCKED
MODE.