Rosco CubeConnect, User Manual

Page: 34 / 37

Network Operation
34
10) Put the Transceiver back into the desired mode (the mode it was in before
moving it to "Dongle Pair" mode)
11) The Dongle will only listen to a paired Transceiver and will ignore all other
data. Care must be taken because Dongles do not automatically clear
previous pair settings when a new
pairing is established. Dongles must
be manually cleared if they were
previously paired using steps 5 & 6
above.
NOTE: Dongle should be
inserted into the DMX IN
connector.