Rosco CubeConnect, User Manual

Page: 13 / 37

Locked Mode Operation
13
The microprocessor continuously sends a copy of the INPUT BUFFER data to
either the wireless radio antenna or to the DMX OUT connector (or both),
depending on the mode selected.
The INPUT BUFFER is in RAM, which is volatile memory. Thus if you leave the
Transceiver in an INPUT MODE and power cycle it, all the channel data in the
BUFFER will be lost and would need to be re-sent to be valid again.
CH1
CH2
CH3
CH254
LOCKED MODE OPERATION
RADIO ANTENNA
Radio Antenna sends
entire saved data
block.
DMX OUT
Saved data is also sent
to the DMX connector
EEPROM (SAVED) DATA
(ie. non-volatile memory)
DMX IN
or
BLUETOOTH IN
or
DB9 SERIAL IN
or
WIRELESS IN
LOCKED