Rosco CubeConnect, User Manual

Page: 16 / 37

DB9 Serial In/Wireless & DMX Out Operation
16
How It Works
If a wireless light is put into SERIAL Mode, and set to Serial Address #1, the
MINI-SSC Command to put the Red LEDs (channel #1) of that light to full on
(100% on) would be:
CHARACTER 2 CHARACTER 3 CHARACTER 1
[255]
(Sync Marker)
[1]
(Channel #)
[254]
(Intensity Setting)
The MINI-SSC Command to turn the Green LEDs (channel #2) of the same
fixture to 50% intensity would be:
CHARACTER 2 CHARACTER 3 CHARACTER 1
[255]
(Sync Marker)
[2]
(Channel #)
[127]
(Intensity Setting)
NOTE: When sending MINI-SSC commands, the maximum intesity that can be
sent is 254.