background image

Saving your song along with the lyrics

VIMA JM-8 

r

81

Resynching lyrics

If you want to correct Lyrics synchronization for a song 
that already contains Lyrics data, there is no need to 
import a new text file. 

In that case, proceed as follows to select the “LYRICS 
SYNC” page:

(1) If necessary, load the song whose Lyrics data you 

want to resynchronize.

(2) Press the [EXIT] button repeatedly until it stops 

flashing to return to the main page (if necessary).

(3) Press 

[MENU]

 ‰ 

[ADVANCED]

 ‰ 

[LYRICS¥SYNC]

.

The message means that the lyrics synchronization of 
the previously selected song will be erased. 

(4) If that’s OK with you, press the 

[YES]

 display but-

ton. 

If not, press the 

[NO]

 display button to return to the 

“MENU” page. 

If you press 

[YES]

, you’re all set for the synchroniza-

tion work:

This display page shows the first text lines of the SMF 
file you selected.

(5) Proceed with “Synchronizing the text file” on 

p. 80.

Saving your song along with the 
lyrics

After synchronizing the Lyrics, you must save the song 
again. To do so, proceed as follows:

(1) On the “LYRICS SYNC” page, press the 

[SAVE]

 dis-

play button.

the display changes to:

(2) Select the device where you want to save your 

song:

(3) Select the folder where you want to save your 

song by pressing its name.

If you like, you can also create a new folder where 
the file will be saved. If you don’t, proceed with step 
(4) below.

(a) After performing step (2), press the 

[NEW¥FOLDER]

 

display button.

SMF and mp3 songs you save after synchronizing lyr-
ics for them will contain those lyrics (as part of their 
data set). When you save a WAV file with synchro-
nized lyrics, however, a separate .lrc file with the 
same name as the related WAV file is saved to the 
location of the audio file.

Display button

Meaning

HDD

Your song will be saved to the internal 
hard disk.

USB

Your song file will be saved to a con-
nected USB storage device. (You can 
still connect it now if you forgot to do 
so earlier.) 

JM-8_OM_GB.book  Page 81  Wednesday, July 29, 2009  4:43 PM

Summary of Contents for VIMA JM-8

















































































































































































Reviews: