Roland VIMA JM-8, Owner'S Manual

Page: 55 / 176

Specifying the playlist behavior
VIMA JM-8
r
55
(5) Press the
[ADD¥TO¥PLAYLIST]
display button to add
the selected song.
The display returns to the following page:
Your song has been added at the end of the list.
(6) Select a song.
(7) Use the
[MOVE¥UP]
display button to move the
song to the desired position in the list.
If you move the song to the wrong position, you can
move it down using the
[MOVE¥DOWN]
display but-
ton.
(8) Press the
[SAVE]
display button to save your edited
list.
If you forget to save your playlist, it will revert to the
previous version when you switch off the JM-8 or
when you select a different playlist.
Deleting steps
You can also remove song steps that you no longer
need.
(1) See “Selecting an existing playlist” on p. 51.
(2) Select the step you want to remove.
(3) Press the
[REMOVE]
display button.
The selected step disappears and all subsequent steps
move up one entry. Example: if you delete step 04
from the list, step 05 becomes 04, step 06 becomes
05, etc.
(4) Press the
[SAVE]
display button to save your edited
list.
If you forget to save your playlist, it will revert to the
previous version when you switch off the JM-8 or
when you select a different playlist.
Moving existing steps to a different position
You can also change the order of existing steps in your
playlist.
(1) See “Selecting an existing playlist” on p. 51 or cre-
ate a new playlist.
(2) Select the step you want to move to a different
position.
(a) Press one of the following display buttons:
(b) Press the
[SAVE]
display button to save your edited
list.
If you forget to save your playlist, it will revert to the
previous version when you switch off the JM-8 or
when you select a different playlist.
Specifying the playlist behavior
Below please find two functions that allow you to
“automate” and “customize” certain aspects of your
playlists.
Activating continuous song play-
back
The JM-8 provides a function that lets you specify
whether all songs of the selected playlist should be
played back one after another or whether playback
should stop at the end of each song. This function is on
by default, but performers who rely on the Playlist func-
tionality for their set may want to switch it off.
Display
button
Meaning
MOVE UP Allows you to move the selected step
towards the beginning of the selected
playlist.
MOVE DOWN Allows you to move the selected step
towards the end of the selected playlist.
JM-8_OM_GB.book Page 55 Wednesday, July 29, 2009 4:43 PM