Roland VIMA JM-8 Owner'S Manual Download

Page: 39 / 176

Saving your recording as an audio file

VIMA JM-8

• You can also delete several characters by pressing a

shift

[Î]

display button and using the

[ø][

]

display

buttons (bottom right). Next, press the display button
of the character that should replace your string.

• If you forgot to insert a character, use

[ø]

[

]

select the position where the missing character
should be inserted and enter it.

(8) To confirm your name and save the file, press the

[ENTER]

display button.

The display shows a “Working” message and returns
to the main page when the operation is finished.

Your audio file has been saved to the “My Record-
ings” folder on the internal hard disk (HDD).

JM-8_OM_GB.book Page 39 Wednesday, July 29, 2009 4:43 PM

Summary of Contents for VIMA JM-8

















































































































































































Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands

Roland VIMA JM-8, Owner'S Manual

Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands